Dell W-IAP103 Guide de l'utilisateur télécharger pdf (Page 21)

100

101

airwave-rtls

airwave-rtls <IP-address> <Port> <key> <frequency> [include-unassoc-sta]

no…

Description

This command integrates W-AirWave Real-Time Asset Location Server (RTLS) settings for Instant and sends the

Radio-frequency identification (RFID) tag information to a W-AirWave RTLS server with the RTLS feed to accurately

locate the wireless clients.

Syntax

Command/Parameter Description Default

<IP-address>

Configures the IP address of the W-AirWave RTLS

server.

—

<Port>

Configures the port for the W-AirWave RTLS server. —

<key>

Configures key for service authorization. —

Configures the frequency at which packets are sent to

the RTLS server in seconds.

include-unassoc-sta

When enabled, this option sends mobile unit reports to

the W-AirWave RTLS server for the client stations that

are not associated to any W-IAP (unassociated

stations).

Disabled

no…

Removes the specified configuration parameter. —

Usage Guidelines

Use this command to send the RFID tag information to W-AirWave RTLS. Specify the IP address and port number

of the W-AirWave server, to which the location reports must be sent. You can also send reports of the unassociated

clients to the RTLS server for tracking purposes.

Example

The following command enables W-AirWave RTLS:

(Instant AP)(config) # airwave-rtls ams-ip 192.0.2.3 3030 pass@1234 5 include-unassoc-sta

Command History

Version Description

Dell Networking W-Series Instant 6.2.1.0-3.3

This command is introduced.

Command Information

W-IAP Platform Command Mode

All platforms

Configuration mode

Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide airwave-rtls | 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 575 576

Commentaires sur ces manuels

Pas de commentaire

Dell W-IAP103 Guide de l'utilisateur Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Points d'accès WLAN Dell W-IAP103