Dell W-IAP103 Guide de l'utilisateur Page 281

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 576
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 280
show ap debug stm-config
show ap debug stm-config
Description
This command displays the W-IAP station management configuration information.
Usage Guidelines
Use this command to view the details of station management configuration.
Example
The following output is displayed for the show ap debug stm-config command:
SSID:
Server Load Balancing:disable
MAC Authentication:disable
RADIUS Accounting:disable
SSID:__wired__eth1
Server Load Balancing:disable
MAC Authentication:disable
RADIUS Accounting:disable
SSID:wireless-local-nw
Server Load Balancing:disable
MAC Authentication:disable
RADIUS Accounting:disable
Associated RADIUS Server:InternalServer
The output of this command provides the following information for each SSID:
Column Description
SSID
Indicates the name of the SSID.
Server Load Balancing
Indicates if server load balancing is enabled.
MAC Authentication
Indicates if MAC authentication is enabled.
RADIUS Accounting
Indicates if RADIUS accounting is enabled.
Associated RADIUS
Server
Displays the authentication server details configured for an SSID.
Command History
Version Description
Dell Networking W-Series
Instant 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show ap debug stm-config | 281
Vue de la page 280
1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 575 576

Commentaires sur ces manuels

Pas de commentaire