Dell W-IAP103 Guide de l'utilisateur télécharger pdf (Page 386)

100

101

386 | show interface counters Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide

show interface counters

Description

This command shows the Ethernet interface packet counters for the W-IAP.

Usage Guidelines

Use this command to view table of L2 interface counters.

Example

The following example shows the partial output of show interface counters command:

bond0 is up, line protocol is up

Hardware is Gigabit Ethernet, address is d8:c7:c8:c4:42:98

Speed 1000Mb/s, duplex full

Received packets 9441

Received bytes 1134064

Receive dropped 0

Receive errors 0

Receive missed errors 0

Receive overrun errors 0

Receive frame errors 0

Receive CRC errors 0

Receive length errors 0

Transmitted packets 16435

Transmitted bytes 841278

Transmitted dropped 0

Transmission errors 0

Lost carrier 0

Parameter Description

Speed Shows speed of the Ethernet interface.

Received packets Shows total number of received packets.

Received bytes Shows the total number of received bytes.

Receive dropped Shows total number of packets dropped.

Receive errors Shows total number of errors during packet receive.

Receive missed errors Shows total number of errors missed during packet receive.

Receive overrun errors Shows total number of received overrun errors.

Receive frame errors Shows total number of frame errors during packet receive.

Receive CRC errors Shows total number of CRC errors during packet receive.

Receive length errors Shows total length of the error.

Transmitted packets Shows total number of transmitted packets.

Transmitted bytes Shows total number of transmitted bytes.

1 2 ... 381 382 383 384 385 386 387 388 389 390 391 ... 575 576

Commentaires sur ces manuels

Pas de commentaire

Dell W-IAP103 Guide de l'utilisateur Page 386

Commentaires sur ces manuels

Produits connexes et manuels pour Points d'accès WLAN Dell W-IAP103