Dell Chassis Management Controller Version 4.50 Guide de l'utilisateur télécharger pdf (Page 55)

100

101

getflexaddr

Description Displays enabled/disabled status for the entire chassis. If used with the -i option, the command

displays MACs/WWN on a per slot basis.

This subcommand is applicable only for CMC.

To run this subcommand, you must have the CMC Login User privilege.

NOTE: If FlexAddress is not activated on the chassis, the command displays server-assigned

MAC/WWN addresses. If the slot is empty, the command enters blank in the server-assigned

MAC/WWN addresses. If an external console controls the MAC/WWN addresses, the

command displays an externally managed message.

Synopsis

racadm getflexaddr [-i <slotNum>]

Input -i <slotNum> — Specifies the slot information that must be displayed. <slotNum> can be

from 1 to 16.

Output None

Example

Display current flex address settings for all slots and fabrics.

racadm getflexaddr

<Slot#> <Status> <Server Presence>

1 Enabled Present

2 Enabled Present

3 Enabled Not Present

4 Enabled Not Present

5 Enabled Present

6 Enabled Not Present

7 Enabled Not Present

8 Enabled Not Present

9 Enabled Not Present

10 Enabled Extension(2)

11 Enabled Not Present

12 Enabled Not Present

13 Enabled Extension(5)

14 Enabled Not Present

15 Enabled Not Present

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 427 428

Commentaires sur ces manuels

Pas de commentaire

Dell Chassis Management Controller Version 4.50 Guide de l'utilisateur Page 55

Commentaires sur ces manuels

Produits connexes et manuels pour Serveurs Dell Chassis Management Controller Version 4.50