Dell PowerVault ML6000 Manuel d'utilisateur télécharger pdf (Page 186)

Chapter 9 Running Your Library

Locking and Unlocking the I/E Stations

Dell PowerVault ML6000 User’s Guide 186

remains locked until the media has been successfully moved to its

destination. This allows the media to be returned to the I/E station

slot in the event of a put error.

• A user has requested that the I/E station door be locked.

• If the I/E station slots are configured as storage slots, the door is

always locked. When all I/E station slots are configured as storage

slots, you can use the Locking and Unlocking I/E station operation to

unlock the I/E station in the 5U Library Control Module. When the

I/E station is unlocked, you can open the main access door on the 5U

Library Control Module. This, in turn, unlocks all remaining I/E

stations in the library, allowing you to access all remaining access

doors in the library.

The paths to open the appropriate screens are as follows:

• From the Web client, select Operations > I/E Station.

• From the operator panel, select Operations > Lock/Unlock I/E Station.

Manually Unlocking the

I/E Station Door 9

While the recommended procedure is to unlock the I/E station door

using the Operations > I/E Station Lock/Unlock command, you can, if

necessary, unlock the I/E station door manually.

The process for manually unlocking the I/E station door includes the

following steps:

1 Standing in front of the library, look for the small (0.25 inches in

diameter) access hole on the front of the I/E station door.

2 Insert a pencil-shaped object into the access hole and press inward.

If an I/E station is configured as storage, the station door will lock

automatically when you close it, assuming that the library is powered on.

If you unlocked the door while the library was powered off, the door will

lock automatically during power up.

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 437 438

Pas de commentaire

Dell PowerVault ML6000 Manuel d'utilisateur Page 186